Bill Collings

❌SOLD❌ William Laskin Custom Steel String for Bill Collings, 1992

On January 4, 2020 /

This William Laskin Custom is very unusual – built to order during 1992 by one of Canada’s finest luthiers for one of the USA’s best – the late Bill Collings. William Laskin began building guitars during 1971 with an apprenticeship to Jean Larrivee. He is well known for the very high quality of his guitar construction, and also for the inventiveness and complexity of his engraved inlay work, much of which is spectacular.

Used

Price: $4,500.00 CAD

This instrument has sold

❌SOLD❌ Collings SJ Maple, 2012

On July 15, 2019 /

Here’s a fantastic deal on a Collings SJ Maple in new, old stock, shop worn condition – steeply reduced from its original price and advertised here with permission from Collings! The Collings SJ is built with a Sitka Spruce top paired with Maple for the sides, back, and neck. The bridge, head plate and bound fingerboard are Ebony, with Mother of Pearl used for the position markers, headstock decoration and Collings logo. The top bracing is Sitka Spruce and the body blocks, linings and back bracing are Mahogany. The nut and saddle are bone.

New

Price: $4,899.00 CAD

This instrument has sold

❌SOLD❌ Collings OM2H ECW Steel String Guitar, 2010

On May 7, 2019 /

Based on the classic Orchestra Model, the Collings OM2H ECW adds to the stock rosewood bodied, herringbone bound OM2H, with an Engelmann Spruce top and a cutaway.The Orchestra Model is closely related to the OOO , with the primary differences being in the scale length; the OOO is typically 24.9 inches while the OM is 25.5.This OM2H was a custom order, and the original build sheet shows that the purchaser specified an Engelmann Spruce top, on a cutaway Indian Rosewood body.

Used

Price: $4,300.00 CAD

This instrument has sold

❌SOLD❌ Collings OM1A Julian Lage Signature, 2018

On November 19, 2018 /

The Collings OM1A Julian Lage signature model, using the A for Adirondack Spruce top option, is an exceptional guitar and was the last collaboration by Bill Collings before his death in 2017. Barely used 2018 OM1A Julian Lage Signature model, in pristine condition with the original case. This guitar has been barely played – the owner bought two, and ultimately decided to keep only one.

Used

Price: $6,000.00 CAD

This instrument has sold

❌SOLD❌ Collings OM1A Julian Lage Signature Guitar, 2018

On September 20, 2018 /

This Collings OM1 A Julian Lage signature model, using the A for Adirondack Spruce top option, is an exceptional guitar and was the last collaboration by Bill Collings before his death in 2017. Based on Lange’s original 1939 000-18, the Collings OM1-JL uses traditional materials – spruce top, mahogany back, sides and neck, and ebony for the fingerboard, headplate and bridge. The nut and saddle are bone. The tuners are by Waverly, and work very well. On this guitar, the neck is carved to match Lange’s.

New

Price: $0.00 CAD

This instrument has sold

❌ Sold ❌ Collings 001 Mh Mahogany Steel String Guitar, 2012

On September 5, 2018 /

The Collings 001 is based on a very traditional design that’s been a standard for over a century, and this example is built with Mahogany for the top, back and sides. This fine guitar was built in Austin, Texas during 2012. Like every Collings we’ve seen, the build quality is exceptional, with excellent playability and great tone. It is good condition, and we’d rate and price it higher except that there is some subtle finish marking, visible only from close up – from more than a foot away, it’s nearly impossible to see it and doesn’t really show in the photos.

Used

Price: $3,450.00 CAD

This instrument has sold

Bill Collings

❌SOLD❌ William Laskin Custom Steel String for Bill Collings, 1992

❌SOLD❌ Collings SJ Maple, 2012

❌SOLD❌ Collings OM2H ECW Steel String Guitar, 2010

❌SOLD❌ Collings OM1A Julian Lage Signature, 2018

❌SOLD❌ Collings OM1A Julian Lage Signature Guitar, 2018

❌ Sold ❌ Collings 001 Mh Mahogany Steel String Guitar, 2012

THE TWELFTH FRET

MORE SERVICES

STAY CONNECTED