The Twelfth Fret ~ Since 1977 ~

Waverly

Boucher LTD OMH Moonwood and Walnut, 2020

Boucher LTD OMH Moonwood and Walnut, 2020

Here’s something special – a Boucher LTD OMH built with Flamed Black Walnut for the sides and back, and Adirondack Spruce in a Moonwood form for the top. Moonwood is not a specific variety of any kind of wood species. Rather, the name refers to when it was harvested; at varying seasons and phases of the moon, sap content is higher or lower. During autumn and winter, when the tree is moving to hibernation, and just before the new moon, sap content is at its lowest.

New
Price: $5,499.00 CAD
MORE

Huss & Dalton TOMR Custom

Huss & Dalton TOMR Custom

Here we have a new Huss & Dalton TOMR Custom featuring a Thermo-Cured Sitka Spruce top and Indian Rosewood back and sides! The model name breaks down to Traditional Orchestra Model Rosewood. On this guitar, the Custom refers to the choice of the thermo-cured Sitka top;  it’s also available with an Adirondack or Red Spruce top, and without the thermo-cure. Thermo-cured wood is also known as baked, torrefied, and by Martin as part of their VTS (vintage tone system). The process uses controlled, high heat, atmospheric pressure and minimal oxygen and simulates aging. 

New
Price: $4,375.00 CAD
MORE

Huss & Dalton T0014 Rosewood Steel String Guitar

Huss & Dalton T0014 Rosewood Steel String Guitar

Here’s a beautiful new Huss & Dalton T0014 Rosewood, part of the Traditional series and here seen with a Rosewood rather than Mahogany body. The top of the Huss & Dalton T0014 Rosewood is Sitka Spruce and the neck is Mahogany, with Ebony for the bridge and unbound fingerboard. The headplate is Indian Rosewood, and there are no electronics installed – this guitar is entirely acoustic.

New
Price: $4,337.00 CAD
MORE

Huss & Dalton TDR Custom Sitka Top Dreadnought

Huss & Dalton TDR Custom Sitka Top Dreadnought

The Huss & Dalton TDR is, as the name breaks down, a Traditional Dreadnought design with Rosewood for the sides, back, and head plate. The Dreadnought design first appeared during 1916, built by C F Martin for the Oliver Ditson company. The design was not popular at the time but when Martin re-introduced it in 1931, times had changed. These models went on to great success and are now one of the handful of standard guitar body shapes, built by almost everyone and played by countless guitarists.

New
Price: $5,900.00 CAD
MORE

Collings OM1ESS Steel String Guitar Natural, 2019

Collings OM1ESS Steel String Guitar Natural, 2019

The Collings OM1ESS is based on the traditional OM – Orchestra Model body design, but with an Engelmann Spruce top and a 24.9 inch (632mm) scale length. The OM body has been favored by performing fingerstylists since its introduction by Martin in 1930 as a 14-fret adaptation of the 12-fret OOO models. Collings builds some of the finest instruments available, and this Collings OM1ESS, built during 2019 in Austin Texas is an excellent example of their work.

Used
Price: $4,999.99 CAD
MORE

❌SOLD❌ Collings 01 Steel String Sunburst Guitar, 2014

❌SOLD❌ Collings 01 Steel String Sunburst Guitar, 2014

The Collings 01 is based on the small body ‘single 0’ design introduced by C F Martin around 1898, and still a popular model in several trim and material grades. The 01 roughly maps to the 0-18, classed as a ‘Parlor Guitar’. Following a traditional pattern, the Collings 01 is built using a combination of a top grade Sitka Spruce top and braces, Mahogany for the rest of the body and neck, and Ebony for the head plate, fingerboard and bridge.

Used
Price: $3,999.99 CAD

This instrument has sold

MORE

THE TWELFTH FRET

Guitarists’ Pro Shop
2132 Danforth Avenue
Toronto, Ontario  M4C 1J9 CANADA
○ Sales: +416•423•2132
○ Service: +416•423•1554
Email

STAY CONNECTED