The Twelfth Fret ~ Since 1977 ~

Guitar Shop

❌SOLD❌ Martin D35 with LR Baggs M1a Pickup Natural, 2008

❌SOLD❌ Martin D35 with LR Baggs M1a Pickup Natural, 2008

The Martin D35, recognizable for its distinctive three-piece back, has been part of Martin’s standard lineup since its 1965 introduction. The design was generated for a practical reason – it allowed use of smaller sections of Rosewood that could not fit on a two-piece back as used on the D-28 or D-45. While the D28 and D35 share many construction features, the D35 can have a bit more tonal range and better developed low and high end response and balance.

Used
Price: $2,850.00 CAD

This instrument has sold

MORE

Gibson Les Paul Classic 60s Reissue Ebony, 2002

Gibson Les Paul Classic 60s Reissue Ebony, 2002

The Gibson Les Paul Classic 60s Reissue appeared during 1990 as a reissue of the 1960 Les Paul model, with its key feature being a slim neck profile. This model has been produced in three stretches – from 1990 to 1998, from 2000 to 2008, and since 2014. The headstock decal originally read ‘Les Paul Model’ as the originals did, and this was changed to ‘Les Paul Classic’ in 1993. The pickguard is also engraved with ‘1960’.

Used
Price: $2,799.00 CAD
MORE

NO LONGER AVAILABLE!!! Taylor 526ce Mahogany Top Steel String Guitar, 2014

NO LONGER AVAILABLE!!! Taylor 526ce Mahogany Top Steel String Guitar, 2014

Now discontinued, the Taylor 526ce Mahogany Top steel string guitar has featured both Venetian (rounded) and Florentine (sharp) cutaways over its life. Dating to June 18 2014, this Taylor 526ce is in very good, original condition with only very minor wear. At the time this guitar was built, the 526ce model sported a single layer black pickguard, ivoroid binding and a uniform brown tint finish without edge-shading.

Used
Price: $2,800.00 CAD

This instrument has sold

MORE

❌SOLD❌ Marc Beneteau Cutaway Steel String Guitar 1988

❌SOLD❌ Marc Beneteau Cutaway Steel String Guitar 1988

Here we have a Marc Beneteau Cutaway steel string acoustic guitar combining Spruce and Mahogany, built during 1988 in St. Thomas, Ontario. Marc Beneteau has been building guitars since 1974 and his instruments are well built and well respected,  and used by stellar players like Don Ross.  This Marc Beneteau Cutaway pairs a Sitka Spruce top with Tropical Mahogany for the sides, back, body blocks and neck. and uses Indian Rosewood for the bridge and unbound fingerboard. The body binding is Satinwood and the cutaway style is Florentine.   

Used
Price: $950.00 CAD

This instrument has sold

MORE

National NRP Steel 14Fret Rubbed Nickel Finish

National NRP Steel 14Fret Rubbed Nickel Finish

The National NRP Steel 14Fret sports a new lightly ‘distressed’ nickel finish and still delivers the warm, rich unmistakable National sound. The National NRP Steel 14Fret is built like other models with steel bodies and single 9.5 inch resonator cone, but is visually distinct with its traditional ‘Sieve’ style cover plate and new finish. This finish can ‘work’ a bit better than the highly polished and reflective surface on the more expensive models, as in not showing smudges as easily.

New
Price: $4,089.00 CAD
MORE

⚌Reduced‼ Gibson SG Supreme Fireburst, 2002

⚌Reduced‼  Gibson SG Supreme Fireburst, 2002

The Gibson SG Supreme was built from 1999 to 2009 and features a figured Maple cap on a Mahogany slab body, paired with a Mahogany neck and bound Richlite fingerboard. At first, the SG Supreme was equipped with a pair of P-90 pickups, but these were phased out in favour of Humbuckers over the year 2000 and into 2001. In 2002, the ‘Fireburst’ finish seen here started rising from the tail of the guitar, rather than the traditional burst with dark edges and lighter center.

Used
Price: $3,420.00 CAD
MORE

THE TWELFTH FRET

Guitarists’ Pro Shop
2132 Danforth Avenue
Toronto, Ontario  M4C 1J9 CANADA
○ Sales: +416•423•2132
○ Service: +416•423•1554
Email

STAY CONNECTED