The Twelfth Fret ~ Since 1977 ~

Texas

Collings 360 LTM Offset Body Electric Warm White, 2017

Collings 360 LTM Offset Body Electric Warm White, 2017

The Collings 360 LTM takes the general idea of a Jazzmaster, but builds it with a single-cutaway Ash body, highly figured maple set neck and custom Lollar P90 pickups. The scale length is between the Jazzmaster and Jaguar at 24.875 inches, and the hardware includes a custom Collings vibrato tailpiece based on the original design plus a Mastery bridge. Tuners are Collings branded Gotoh models with creme buttons.

Price: $3399.00 CAD
MORE

❌ Sold ❌ Collings D2H Sitka Top Dreadnought, 2016

❌ Sold ❌ Collings D2H Sitka Top Dreadnought, 2016

The Collings D2H is one of the best expressions available of the classic 14-fret Spruce and Rosewood Dreadnought design, built to exacting standards with care for build, finish quality, playability and especially tone. These are simply some of the best sounding dreadnoughts made. Here we have a Collings D2H in standard kit, built during 2016 at the Collings shop in Austin, Texas. The top is high grade Sitka Spruce featuring pre-war scalloped X-bracing, paired with Indian Rosewood for the sides and back. 

Price: $3750 CAD

This instrument has sold

MORE

❌ Sold ❌ Collings OM1A Julian Lage Signature, 2018

❌ Sold ❌ Collings OM1A Julian Lage Signature, 2018

The Collings OM1A Julian Lage signature model, using the A for Adirondack Spruce top option, is an exceptional guitar and was the last collaboration by Bill Collings before his death in 2017. Barely used 2018 OM1A Julian Lage Signature model, in pristine condition with the original case. This guitar has been barely played – the owner bought two, and ultimately decided to keep only one.

Price: $6000 CAD

This instrument has sold

MORE

❌SOLD❌ Waterloo WL-K ‘Southwest’ Steel String Guitar, 2017

❌SOLD❌ Waterloo WL-K 'Southwest' Steel String Guitar, 2017

This Waterloo WL-K was built during 2017 in Austin, Texas, and features the ‘Southwest’ finish that evokes the stencils commonly used on guitars of the period. The top is Spruce, paired with Mahogany for the back, sides and neck; the fingerboard is Indian Rosewood, with an Ebony bridge. It’s in very nice, original condition with minimal wear. The original TKL hard shell case is included.

Price: $2800 CAD

This instrument has sold

MORE

New! Collings OM1A Julian Lage Signature Guitar, 2018

New! Collings OM1A Julian Lage Signature Guitar, 2018

This Collings OM1 A Julian Lage signature model, using the A for Adirondack Spruce top option, is an exceptional guitar and was the last collaboration by Bill Collings before his death in 2017. Based on Lange’s original 1939 000-18, the Collings OM1-JL uses traditional materials – spruce top, mahogany back, sides and neck, and ebony for the fingerboard, headplate and bridge. The nut and saddle are bone. The  tuners are by Waverly, and work very well.   On this guitar, the neck is carved to match Lange’s.

MORE

❌ Sold ❌ Collings 001 Mh Mahogany Steel String Guitar, 2012

❌ Sold ❌ Collings 001 Mh Mahogany Steel String Guitar, 2012

The Collings 001 is based on a very traditional design that’s been a standard for over a century, and this example is built with Mahogany for the top, back and sides.  This fine guitar was built in Austin, Texas during 2012. Like every Collings we’ve seen, the build quality is exceptional, with excellent playability and great tone. It is good condition, and we’d rate and price it higher except that there is some subtle finish marking, visible only from close up – from more than a foot away, it’s nearly impossible to see it and doesn’t really show in the photos. 

Price: $3450 CAD

This instrument has sold

MORE

The Twelfth Fret

Guitarists’ Pro Shop
2132 Danforth Avenue
Toronto, Ontario  M4C 1J9
CANADA
○ Sales: +416•423•2132
○ Service: +416•423•1554
www.12FRET.com
Email

@12FRET ON INSTAGRAM