The Eastman E10D follows a traditional dreadnought design featuring an Adirondack spruce top paired with mahogany fir the sides, back and neck. Based on the classic square shoulder dreadnoughts introduced to the mass market in the early 1930s and still the basis of many guitar lines, the Eastman E10D gets pretty much everything right. The Adirondack Spruce top produces a full, rich tone that holds up well when played hard, as might frequently happen in a bluegrass context. There’s plenty of bottom, shimmering top end and everything in between.
Made In USA
This lovely Suhr Modern Custom sports a Claro Walnut top on a Spanish Cedar body, paired with a Pau Ferro neck and Macassar Ebony fingerboard! Claro Walnut is also known as ‘California Black Walnut’. Spanish Cedar or ‘Cedro’ is very commonly used for classical guitar necks, and for bodies on Suhr guitars. A quirk of the Suhr process is that the serial number is established at time of order, sometimes well before the instrument construction is begun, let alone finished. While these numbers are consecutive, that doesn’t always match the sequence pieces are completed so dating via serial number is tougher.
This instrument has sold
MORE →The Jerry Jones Neptune Shorthorn Bass 4 draws from a classic American design by Danelectro, and was built in Nashville from 1981 to 2011. At that point, Jones retired and liquidated his shop. Danelectro was operated from 1946 to 1969 by Nathan Daniel and from 1966 to its close was owned by the MCA record company. Specializing in mass produced, low cost but decent quality instruments and amplifiers, Danelectos were largely available through catalog stores like Sears & Roebuck and Montgomery Ward but often under other names including the Sears brand Silvertone.
This instrument has sold
MORE →Here we have a Waterloo WLSTR! Based on vintage Stella models, the WL STR adds an adjustable truss rod to the base WLS model. The L in the model name indicates that this is ladder braced, not X braced. The Waterloo WLSTR pairs a solid Spruce top with solid Cherry for the back and sides. Mahogany is used for the body blocks and neck, with Indian Rosewood for the 12-fret fingerboard and the head plate for the slotted peghead.
This instrument has sold
MORE →Built from around 2001 to 2010, the National Model D squareneck resophonic guitar uses a wood body and single cone with a spider bridge. The body is built with Mahogany laminate for the top, and Walnut for the back, sides and 12-fret neck. Some models used laminate Spruce for the top, but this one is laminate Mahogany. In 2010, the Model D was replaced by the wood-bodied Smith & Young Model 11. National discontinued the Smith & Young line around 2015.
This instrument has sold
MORE →This Martin Custom 000 guitar is brand new and has not developed its voice, but even so has a warm, rich and evenly balanced tone with plenty of top end sparkle. With a Sitka Spruce top with Martin’s Vintage Tone System (VTS) and Sinker Mahogany for the sides and back. The top and back braces are Sitka Spruce. The 14-fret neck is Honduran Mahogany, with Ebony used for both the bridge and fingerboard. The head plate is solid East Indian Rosewood and bears the large, old style Martin decal.
This instrument has sold
MORE →