Nickel Plate

❌SOLD❌ Gibson CS336 Compact Thinline Archtop Electric Burgundy, 2001

On June 20, 2021 /

While it has strong visual similarities to the popular ES-339, the Gibson CS336 compact thinline has significant differences in construction. Instead of using separate materials for the top, back and sides, the CS336 has back and sides carved from a single block of mahogany with a carved, book matched Flame maple top. The Gibson CS-336 came out of the Custom Shop in 2001, five years after the 1996 introduction of the ES-339.

Used

Price: $4,250.00 CAD

This instrument has sold

National Style O Steel 14 Fret Weathered Steel

On June 15, 2021 /

Drawing from the roots of the single-cone resophonic guitar, the National Style O Steel 14 Fret definitely has a vintage appearance with all the quality of modern Nationals. Sporting a unique ‘Weathered Steel’ finish over a steel body with rolled F-holes and a Maple neck with Ebony fingerboard, the Style O Steel 14 Fret delivers all the tone, volume and projection that National is known for.

New

Price: $4,389.00 CAD

Eastman Romeo SC Thinline Archtop Electric, Red Burst

On June 14, 2021 /

The Eastman Romeo SC is a new limited edition thinline and largely hollow archtop electric design by Otto D’Ambrosio at the Eastman Custom Shop in California. Intended as an imagining of what ‘The Telecaster of the Archtop World’ would be, the Romeo started with defining its balance and player’s hand positions. The body is fairly small at 14.75 inches across, and the ‘Single Cut’ design gives plenty of access to the fretboard.

New

Price: $2,530.00 CAD

❌SOLD❌ Gibson CS336 Thinline Compact Archtop Faded Cherry, 2004

On April 20, 2021 /

Introduced in late 2001 and built until 2010, the Gibson CS336 is based on a scaled-down ES-335, but there are some significant differences. The body blends a carved, two piece solid Maple top with a solid piece of Mahogany, shaped and routed to provide the inner resonant chambers and the solid center block. In the ES-335 design, the top, sides and back are built traditionally using Maple laminate, with a solid Maple center block added. On this model, the bound fingerboard is Indian Rosewood with dot position markers.

Used

Price: $3,350.00 CAD $3,650.00 CAD

This instrument has sold

❌SOLD❌ Deering Jens Kruger Banjo with Kavanjo Pickup Head, 2007

On January 16, 2021 /

Here’s a piece of Canadiana – a Deering Jens Kruger Tenbrooks banjo with Kavanjo pickup head, used in Whiskey Jack, the band that backed up Stompin’ Tom Connors. The Deering Jens Kruger models are the top of the Deering Tenbrooks line. As the name suggests, Jens Kruger was closely involved in the design of this banjo, in particular the tone ring which emulates prized pre-war Gibson models.

Used

Price: $6,450.00 CAD

This instrument has sold

❌SOLD❌ Gibson Memphis ES330 VOS Sunburst, 2013

On January 15, 2021 /

The Gibson Memphis ES330 VOS model is now discontinued, along with the Memphis plant, but is a great re-creation of a late 1950’s ES-330. Introduced in 1959, the ES-330 took visual cues from the new and very successful ES-335, but is uses a fully hollow body without a solid center block. A pair of under-wound P-90s provide great tone. Until about 1963, the ES330 and its cousin the Epiphone Casino set the neck joint at the 16th fret but subsequently the joint was shifted to the 19th fret, allowing easier access to higher frets.

Used

Price: $4,250.00 CAD

This instrument has sold

Nickel Plate

❌SOLD❌ Gibson CS336 Compact Thinline Archtop Electric Burgundy, 2001

National Style O Steel 14 Fret Weathered Steel

Eastman Romeo SC Thinline Archtop Electric, Red Burst

❌SOLD❌ Gibson CS336 Thinline Compact Archtop Faded Cherry, 2004

❌SOLD❌ Deering Jens Kruger Banjo with Kavanjo Pickup Head, 2007

❌SOLD❌ Gibson Memphis ES330 VOS Sunburst, 2013

THE TWELFTH FRET

MORE SERVICES

STAY CONNECTED